JR RELAY

[Sheepdog]

I got a question with the JR relay, I took off the relay, wired it back to the orginal spec (according to color). There is only 3 wires to hook back up right? I did that and now the car won't start, the car will crank fine, but won't start. anyone got any ideas on what i did wrong?

I took the relay out because i just got 310cc injectors. Any help would be appreciated. Thanks

[Batoutahell]

I believe there are 4 wires at the relay: power, ground, and 2 a/t signal wires.

[JRCivic]

The only wires you have to repair in the factory wiring is the red/yellow wire on the Air Temp Sensor. The rest you can simply disconnect from the T-taps.

Good luck.


------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph

[Sheepdog]

I hooked back up 3 wires. the 2 wire on the air temp sensor and the 1 wire sensor (is that the knock sensor??)


am i suppose to hook up the 2 wires only (air temp sensor)

Do i leave the relay on there?
(i took the relay off)

Do i need to hook back up the 1 wire sensor?

By the way, Thanks JRCIVIC, you helped me twice. Thanks a lot.